History
The first French bullpup rifles were developed between 1946 and 1950 at the AME (Atelier Mécanique de Mulhouse) and MAS, testing rounds such as .30 US Carbine, 7.92x33mm Kurz, 7.65x38mm (Made by Cartoucherie de Valence) and some other intermediate calibers. Since France was engaged in the First Indochina War at the time, and was also the second-largest contributor to NATO, the budgets for new types of weapons were reduced and priority was given to the modernisation and production of existing service weapons. Nevertheless, approximately forty different prototypes were developed between 1952 and 1962, most of which were designed for the 7.62x51mm NATO round, however, the round was not found to be suitable for any bullpup designs, and consequently, none were adopted, and the ideas were set aside. MAS then began to manufacture under licence the H&K G3 and the H&K 33 in the 1960s and studies were reactivated to produce a weapon using the new .223/5.56mm round. But the idea to develop and use German weapons was out of question for many members of the French high command. General Marcel Bigeard, against the idea to use German weapons, visited the Manufacture d'Armes de Saint-Étienne and asked the engineers to present him the different prototypes developed. He then chose, amongst different prototypes, what will become the FAMAS.
The FAMAS project began in 1967 under the direction of Paul Tellie and the first prototype was completed in 1971, with French military evaluation of the rifle beginning in 1972.When production problems delayed the general issue of the new rifles, and with the 1978 Battle of Kolwezi showing the immediate need for a more modern weapon, the French Army began searching for a temporary rifle to fill this need until the FAMAS came into full production. The H&K 33 was considered, and a batch of 1200 examples were tested by Infantry, Airborne, Marines, Mechanised and Foreign troops, but it was ultimately turned down in favour of the SIG SG 540, built under licence by Manurhin, until enough FAMAS rifles were produced to begin general issue. The French military finally accepted the rifle in 1978 as the standard French combat weapon.
After adoption, the FAMAS F1 replaced the aging MAS 49/56 rifle and MAT-49 submachine gun, and approximately 400,000 FAMAS F1 assault rifles were produced, with production now complete. The F1 had many problems and was not completely reliable. For instance, the plastic pieces broke easily and the weapon jammed on occasions because of the poor disposable magazine concept. The first magazines were supposed to be disposables, but the budget of the French army never allowed it. The F1 was followed by the G1 that included several minor improvements such as redesigned grips, Magwell compatible with STANAG & FAMAS magazine and an enlarged trigger guard, but it remained conceptual and was never actually produced.
FAMAS G2
The FAMAS G2 was developed circa 1994 to bring the rifle more in compliance with NATO standards by having tighter rifling and accepting standard NATO magazines, but also included several other upgrades taken from the G1 model, such as the enlarged trigger guard and improved hand guards made of fiber glass, rather than plastics like on the F1. The French Navy purchased the FAMAS G2 in 1995, and began distributing it to the Fusiliers Marins and Commandos Marine, but the French Army has held off large scale purchase of the G2 to date, and the FAMAS F1 still remains the Army's primary service rifle.
MAS .223
During the late 1980s, Century Arms imported a very small number of semi-automatic FAMAS' into the United States. However due to poor sales, production and importation ceased and the existing number are not only extremely rare but cost in the range of $8,000 with no spare parts available on the market.Design details
Action
The FAMAS assault rifle is a bullpup configuration, with the ammunition feed behind the trigger. The receiver housing is made of a special steel alloy, and the rifle furniture is made of fiberglass. The rifle uses a lever-delayed blowback action, a system employed on the LMG AA52 derived from the prototypes built during Army Technical Department tests having taken place between the First and Second World Wars.
- Rubber buttpad
- Removable stock
- Cheek rest. Can be reversed for right or left-handed shooter.
- Mobile assembly and ejection port
- Pins
- Bipod
- Handguard
- Charging Handle
- Grenade launcher sight
- Grenade support
- Muzzle brake/22 mm rifle grenade launcher
- Barrel
- Fire control selector: Safety, single shot, automatic
- Trigger
- Magazine release
- Magazine
- Serial number
- (right): 3-round burst or full automatic selector
(left): Sling ring.
| FAMAS | |
|---|---|
 FAMAS F1 | |
| Type | Assault rifle |
| Place of origin |  France |
| Service history | |
| In service | 1978–present |
| Used by | See Users |
| Wars | |
| Production history | |
| Designer | Paul Tellie [3] |
| Designed | 1967–1971 |
| Manufacturer | Nexter |
| Unit cost | F1: 1500 € G2: 3000 € |
| Produced | 1975–2000 |
| Number built | F1: 400 000 |
| Variants | F1 G1 G2 FAMAS Export FAMAS Civil FAMAS Commando |
| Specifications | |
| Weight | 3.61 kg (7.96 lb) (FAMAS F1) 3.8 kg (8.38 lb) (FAMAS G2) |
| Length | 757 mm (29.8 in) / 965 mm (38.0 in) with bayonet |
| Barrel length | F1, G2: 488 mm (19.2 in) G2 Commando:405 mm (15.9 in) G2 SMG:320 mm (12.6 in) G2 Sniper 620 mm (24.4 in) |
| | |
| Cartridge | 5.56x45mm NATO |
| Action | Lever-delayed blowback |
| Rate of fire | 900-1000 rounds/min (F1) 1000-1100 rounds/min (G2) |
| Muzzle velocity | 960 m/s (3,100 ft/s) (F1) 925 m/s (3,030 ft/s) (G2) |
| Effective range | 300 m (F1) 450 m (G2) |
| Maximum range | 3200 metres |
| Feed system | 25-round box magazine (F1) 30-round box magazine (STANAG system) (G2) |
| Sights | Rear aperture fitted with tritium night inserts, front post |
No comments:
Post a Comment